The ASDX series is an enhanced variety of ICT representative products certified by Sensym, and also an SDX series sensor with leading industrial level. The enhanced ASDX sensor has a slightly larger size than SDX, and can provide a high-level (4.0 V measurement range) output voltage at a low price. The series uses an ASIC mounted on the circuit board for complete calibration and temperature compensation. This type of sensor is suitable for non-corrosive, non-ionic working fluids, such as air and dry gas. The sensor can be used to measure the absolute value, difference and pressure of the pressure gauge, ranging from 1 psi (ASDX01DN) to 100 psi (ASDX100). The absolute pressure sensor has an internal vacuum reference whose output voltage is proportional to the absolute pressure. Differential pressure sensors allow pressure to be applied to both sides of the detection diaphragm and can be used in pressure gauges or differential pressure measurements. The accuracy of all ASDX sensors is within ±2.0%. The operating characteristics of the sensor are obtained using a single 5V power supply. The sensor is designed and manufactured according to various standard clauses contained in ISO9001.

ASDX series pressure sensors from 0-1 psi up to 0-100 psi
Features:
● Varistor sensor
● Precision ASIC
● High level output
● Temperature compensation

Environmental technical indicators: temperature range
● After compensation: 0oC to +85oC
● Working time: -20oC to 105oC
● During storage: -40oC to 125oC
● Vibration: 10g at 20-2000Hz
● Shock: 50g 11ms
● Life: at least 1 million cycles

Application
● Medical equipment
● Air pressure measurement
● HVAC control
● Pneumatic control