ProductProduct
Contact Us
86-0755-88605932
- 電話:0755-88605932
手機:13798258190
郵箱:szdlwy@163.com
網(wǎng)址:m.ydfwloj.cn
地址:廣東省、深圳市、龍崗區(qū)
Flow sensor AWM5101VN
AWM5000 series high flow/amplified airflow quality sensor: The AWM5000 series is a venturi flow tubular housing that can measure the airflow of water up to 20 liters/minute and a maximum pressure drop of 2.25". The micro-bridge chip directly contacts the airflow, greatly reducing the Error caused by clogged vents or bypass. Rugged, general package form: Rugged, plastic package can withstand common mode pressure of 50 psi, internal small sensor chip can allow 100 grams of impact under rated specifications, two measurements The hole is a separate module, which can be changed according to the actual situation with minimum mold cost. The plug-in AMP connector provides a very reliable connection. Built-in signal processing circuit: each AWM5000 series product includes temperature compensation and temperature compensation Gas calibration, gas calibration is obtained by laser calibration.
AWM5000 series airflow quality sensor features:
● Various flow interface options
● Venturi tube design
● Remote installation
● Laser calibration of CO2 and N2 argon calibration
AWM5101VN airflow quality sensor technical specifications:
● Flow range: 0-5 SLPM
● Suffix-Calibration gas: VA- Argon (Ar)
● Temperature range: -20~+70?C
● Shock index: 100g peak, 6ms half sine (3drops, 3 in each direction)
● Output @ Relative point: 5VDC@ full-scale flow
● Differential pressure@full range: refer to pressure & airflow table
● Full-scale output drift: suffix VA or VN ± 7.0% reading, VC ± 10.0% reading
● Linearity error: ±3.0% of reading
● Hysteresis & repeatability: ±0.5% of reading
● Leakage max: 0.1psi/min, in static
Product use: air pollution monitoring equipment, HVAC humidity control, gas analyzer, medical equipment, process control, etc.
AWM5000 series airflow quality sensor features:
● Various flow interface options
● Venturi tube design
● Remote installation
● Laser calibration of CO2 and N2 argon calibration
AWM5101VN airflow quality sensor technical specifications:
● Flow range: 0-5 SLPM
● Suffix-Calibration gas: VA- Argon (Ar)
● Temperature range: -20~+70?C
● Shock index: 100g peak, 6ms half sine (3drops, 3 in each direction)
● Output @ Relative point: 5VDC@ full-scale flow
● Differential pressure@full range: refer to pressure & airflow table
● Full-scale output drift: suffix VA or VN ± 7.0% reading, VC ± 10.0% reading
● Linearity error: ±3.0% of reading
● Hysteresis & repeatability: ±0.5% of reading
● Leakage max: 0.1psi/min, in static
Product use: air pollution monitoring equipment, HVAC humidity control, gas analyzer, medical equipment, process control, etc.
Previous : Flow sensor FS1015CL
Next : Flow sensor AWM5104VN